xTool D1 Pro

Safety First

xTool D1/D1 Pro LSO Training Safety Guide for Laser Cutting & Engraving

Pre-Sales

Differences between D1 and D1 Pro D1 Pro Product Introduction

Warranty

xTool Warranty for D1 Pro

Guide: Beginner

The Compatibility of the Power Adaptors of xTool D1 Pro How to Connect the Device to xTool Creative Space Application xTool D1 Pro Quick Start Guide Assembly & First-time Use of D1 Pro [Video] Assembly of xTool D1 Pro + 40W Laser Module [Video] Assembly of the Extension Kit for xTool D1 & D1 Pro [PDF]

See all 10 articles

Guide: Software

How to View the G-code File on the TF Card Operate xTool D1 Pro with XCS Operate xTool D1 Pro with LightBurn Tutorial of using xTool D1 Pro and XCS[Video] Upgrade the Firmware for D1 and D1 Pro

Guide: Hardware

Set the Laser Positioning Mode Set the Laser Positioning Offset Installation and Troubleshooting of Limit Sensors[Video]

Guide: Project

How to Use the TF Card Offline Mode Example Project - Making a Phone Holder How to Achieve a Better Engraving Effect with Texts?

Guide: Connection

Tutorial for Importing and Exporting Gcode File How Network Disconnection Affects Machine Processing Connect the Device Through Wi-Fi Connect the Device Through an IP Address

Troubleshooting: Software

How to Deal with the Garbled Text on LightBurn for xTool D1 Pro The Process Button on XCS Won't Work XCS Can't be Installed due to Mac Security Preferences Firmware Upgrade Gets Stuck at 3% Restore a Bricked D1 Pro Motherboard Due to Faild Firmware Upgrade [Video]

Troubleshooting: Hardware

Help Tech Support Troubleshoot Faster How to Deal With Noise During Processing for D1 Pro 【Machine Issue - General】 The Laser Module Won't Home without Double-clicking "Home" on LightBurn Task Canceled During Processing Video-The Laser Module of D1 & D1 Pro Won’t Move

See all 40 articles

Troubleshooting: Connection

XCS Shows 'The Device Has Been Disconnected' XCS Can't Find Device Through USB XCS Can’t Find Device Through Wi-Fi XCS Finds Device Through USB But Won't Connect XCS Finds Device Through USB But Shows as Unknown XCS Won't Recognize the Laser Module

Maintenance

How to Replace the D1 Pro Laser Module Fan Adjust the Focus of the 2W Infrared Laser Module [Video] Adjust the Tightness of the Timing Belts [Video] Adjust the X-Axis Gantry Levelness [Video] Adjust the Focal Length of the Laser Module [Video] Adjust the Fire Detector Sensitivity

See all 16 articles

D1 Pro Previous

Valuable Information for Troubleshooting You could Provide Us with D1 Pro Engraving & Cutting Parameters for Reference D1 Pro FAQ Note: Laserbox basic NOT for D1 Pro xTool D1 Pro Quick Start Guide Fix the Z-axis Plate Tight

See all 34 articles