Switch Positioning Mode between Red cross & Laser spot for D1/D1Pro

Article author
xTool Customer Service

With D1 Pro being powered on and connected to your computer(via USB/Wi-Fi/IP), click ⚙ > Working parameters,  you can select either Red cross or Laser spot as the positioning mode.

If Red cross is selected, a red cross will automatically emerge every time the D1/D1 Pro is turned on.

While the red cross will be automatically turned off once it starts laser processing.


If Laser spot is selected, you will have to enable it each time by clicking Process > Enable.



Every time when you leave the processing page, the Laser spot will be turned off. You need to turn it on again if you want to use Laser Spot for positioning.

Note: The Laser power value for positioning can be set to up to 10%.

Was this article helpful?

6 out of 10 found this helpful

Have more questions?


  • je viens d'acheter xtool d1 pro et je n'arrive a rien aidez moi 

  • Glorion Roselyne Hello Glorion, Sorry for the late reply! Feel free to let us know if you still need assistance with the problem.

  • moi j'ai besoin d'aide svp a chaque fois que je grave une photo  le travail ne se fais jamais completement ,je ne vois jamais le bas de ma photo ou les coté aussi  impossible d'avoir ma photo complete que dois-je faire svp .j'ai un d1pro 20 watt  .. j'ai chercher partout sur le web  pas encore trouver de réponse    merci a l'avance pour une reponse  

  • si je ne recois pas ici voici mon mail petunias4@hotmail.com


  • Hello Mjosee Levesque
    Thanks for the feedback. A ticket has been created regarding this inquiry.
    Our support team will get back to you via email. Appreciate your support and suggestion.

Article is closed for comments.