10 W Laser Module of xTool D1

Contents

List of items

Replace the laser module

1. Remove the original laser module

2. Install the new laser module

3. Complete the wiring

List of items

Laser module x 1

Power adapter x 1

Replace the laser module

1. Remove the original laser module

（1）Move the cable out of the slot, press the connector, and unplug the connector.

（2）Turn the screw counterclockwise to loosen it, and remove the screw and laser module.

2. Install the new laser module

  Place the laser module into the slot and tighten the thumb screw.

3. Complete the wiring

Insert the connector of the connection cable into the port of the laser module, and place the cable and cable sleeve into the slot.

Wiring tips:

Note: If the original laser module is a 5-watt one, you need to replace the power adapter with the one delivered with the 10-watt laser module.