How To Set the Parameters According to The Materials

	Background	Light-colored woods such as birch, cherry, or maple can be vaporized well by the laser and are therefore more suitable for engraving.
	Attention	The same material from different suppliers will vary, So the following parameters are for user's reference only and need to fine-tune the parameter on themselves.
Planner parameters
Ring code SN	Material name	Cutting		Engraving
		Speed	Power	Speed	Power
-	0mm Paper	100%	5%	100%	5%
-	7.1mm iPhone6s	0%	0%	90%	20%
0	3mm Basswood	20%	90%	80%	50%
1	5mm  Basswood	7%	95%	80%	50%
2	3mm Black Walnut	12%	90%	80%	50%
3	5mm Black Walnut	12%	94%	80%	50%
6	3mm Pine	13%	90%	80%	50%
7	5mm Pine	13%	93%	80%	50%
10	3mm Cherry	14%	90%	80%	50%
11	5mm Cherry	11%	95%	80%	50%
12	3mm Mahogany	15%	90%	80%	50%
13	5mm Mahogany	6%	96%	80%	50%
14	3mm Willow	12%	92%	80%	50%
15	5mm Willow	5%	95%	80%	50%
16	3mm Acrylic	7%	96%	80%	50%
17	5mm Acrylic	4%	96%	80%	50%
27	2mm Cardboard	40%	80%	100%	10%
28	3.5mm Cardboard	27%	85%	100%	10%
60	2.5mm Acrylic	4%	90%	80%	35%
61	3mm Dense board	15%	90%	80%	30%
62	2.5mm Basswood	20%	90%	80%	30%
63	1.8mm Basswood	20%	90%	80%	30%
Cylindrical engraving
-	Glass bottles	-	-	100%	20%
-	Mineral water bottle	-	-	20%	80%
-	Acrylic	-	-	50%	80%
-	Paper towel tube	-	-	30%	80%
-	Easy Pull Can	-	-	100%	30%
-	Wood cylinder	-	-	50%	80%
-	Tsingtian Stone	-	-	100%	20%
-	Ceramic Mug	-	-	100%	20%