How to Clean the Laser Lens

    Article author
    Admin
    • Updated

    Issue Description

    When the machine processes for four hours, the XCS software will prompt the error code "Wx13". Please follow the instructions below to clean the laser lens.
    Note: Cleaning the laser lens will improve the stability of the laser power.
     

    Solutions

    1. Check the lens with the front camera of your phone or mirror. Clean the lens with a cotton swab moistened with alcohol.
    image - 2023-08-03T172849.985.png
    1. Power off the machine, remove the baseplate and then turn M1 upside down, and then clean the lens with a cotton swab moistened with alcohol.
    image - 2023-08-03T172920.598.png

    Was this article helpful?

    1 out of 2 found this helpful

    Have more questions?

    Comments

    0 comments

    Article is closed for comments.