The Compatibility of the Power Adaptors of xTool D1

This article applies to:

D1 and D1 Pro with all laser modules.

 

When you already have a D1 or D1 Pro, and if you buy a separate laser module kit, you will get an extra power adaptor that may be different in specs.

If you want to check the compatibility of the adaptors, please refer to the specs below:

 

Machine	Specification of the Power Adaptor
D1 5W	12V3A
D1 10W	12V5.5A
D1 20W	Compatible with the power adaptor of D1 5W and D1 10W. An additional adaptor will be needed for the laser module.
D1 2W	13.5V9A

 

Generally, high-power power adaptors can be applied to low-power laser modules.

For example, the power adaptor of D1 Pro 40W can be applied to D1 Pro 2W, 5W, 10W, and 20W.

However, the power adaptor of D1 Pro 5W can not be applied to D1 Pro 2W, 10W, 2W, and 40W.

Note: The ports of the D1 and D1 Pro motherboards are different, so their power adaptors

aren't interchangeable.

If you have any questions, feel free to contact us.