The Laser Module Won't Fire with Air Assist Set

Article author
xTool Customer Service
  • Updated

Issue Description

When you fit the air nozzle on the laser outlet, the laser module won't fire.
After removing the air nozzle, the laser module works properly.

#1 Check the Lens Mount

If the lens mount is inclined, the air nozzle is not parallel to the laser emission direction. Therefore, the laser module will fire at the inner wall of the air nozzle.
Reinstall and tighten the lens mount.

#2 Check the Silver Ring Magnet

If the magnet is loose or off, apply glue to the magnet inside the mount.

#3:Check the Air Nozzle

Remove the air nozzle, and check if any foreign objects are inside it.
If not, put the air nozzle back.

Was this article helpful?

0 out of 1 found this helpful

Have more questions?



Article is closed for comments.