Mirrored Image in Cylindrical Processing

Article author
xTool Customer Service
  • Updated

Issue Description

If you use the rotary attachment, and the engraved image is flipped horizontally compared with the image on XCS, or the engraved result is just one line. Please refer to this article to troubleshoot.

#1. Check the Placement

Make sure the rotary is placed in the way shown in the photo below.

#2: Check the Rotary Attachment

Check whether the attachment connection cable is loose or broken.
If yes, replug the cable and try again.

Was this article helpful?

0 out of 1 found this helpful

Have more questions?



Article is closed for comments.