The Processing Modes of M1 and the Relevant Specifications

The Specifications of the Processing Modes: 

Laser Flat	Processing Material Size	Maximum Processing Thickness	If the Baseplate Is Required	If the Honeycomb Panel Is Required	Supported Processing Modes	Supported Image Types
	385*300mm	16mm	Either One		Score Engrave Cut	Vector Bitmap

Laser Cylindrical	Processing Material Size	Focusing Range (Initial Position of the Baseplate Is 0)	If the Baseplate Is Required	If the Honeycomb Panel Is Required	Supported Processing Modes	Supported Image Types
	270*385mm	-19~16mm	No	Optional	Score Engrave	Vector Bitmap

Open Plane	Processing Material Size	Focusing Range (Initial Position of the Baseplate Is 0)	If the Baseplate Is Required	If the Honeycomb Panel Is Required	Supported Processing Modes	Supported Image Types
	385*270mm	-19~16mm	No	Optional	Score Engrave Cut	Vector Bitmap

Blade Cut /Print&Blade Cut	Processing Material Size	Maximum Processing Thickness	Knife Pressure	If the Baseplate Is Required	If the Honeycomb Panel Is Required	Supported Processing Modes	Supported Image Types
	365*300mm	1.5mm	45~360g	Yes	No	Blade Cut	Vector

Maximum Processing Speed:

Processing Modes	Maximum Speed
Score	160mm/s
Engrave	250mm/s
Cut	160mm/s
Blade Cut	80mm/s