The Enclosure Fan Won't Work

    Article author
    xTool Customer Service
    • Updated
    This article applies to:
    D1 and D1 Pro
    Enclosure
     

    Issue Description

    If you have plugged in the fan connector and adapter connector, but the exhaust fan won't work, please refer to this article for troubleshooting.
     

    #1 Check the Power Adapter

    1. Check if the indicator on the adapter lights up.
    2. If not, the adapter is faulty and needs to be replaced.
    3. If it lights up, proceed to the next step.

     

    #2 Check the Fan Module

    1. Check the fan for any damage, such as a broken exterior or fan blade.
    2. If so, the fan needs to be replaced.
    3. If not, proceed to the next step.
     

    #3 Check the Fan Wire

    1. Check if the connection wire at the fan end is broken or disconnected.
    2. If so, it needs to be replaced along with the fan.
    3. See this video on how to replace the fan.
      Troubleshoot and Replace the Enclosure Fan
     

    If None of the Above Works

    If you have followed the instructions above and the issue is still not resolved, please read the article in the link below, collect the troubleshooting steps you have taken, and contact xTool tech support for further advice.

    Was this article helpful?

    0 out of 1 found this helpful

    Have more questions?

    Comments

    0 comments

    Article is closed for comments.